The AI for Water.
NEER is the AI agent for your water, sewer and stormwater systems. Ask it to build a model, run a storm, check every hydrant or plan the budget. It does the work, shows its sources and waits for your approval.
More risk, more rain, the same number of people.
ASCE's 2025 grades for America's drinking water, wastewater and stormwater.
Drinking water needs over the next 20 years, mostly pipes and transmission.
Wastewater and stormwater needs over 20 years to protect the nation's waters.
"You're managing more risk with the same, or fewer, people."Aging pipes · heavier storms · MS4 and NPDES reporting · open positions
Sources: ASCE 2025 Report Card · EPA 7th DWINSA · EPA 2022 Clean Watersheds Needs Survey
One loop, from data to decisions.
NEER senses your system, reasons about it with models and risk, acts through your crews and capital plan, and learns from what happens next. Every product has a place in the loop.
Bring every source into one map and check it.
Model it, calibrate it and score the risk.
Turn answers into work, plans and alerts.
Every storm and inspection sharpens the next answer.
What happens in the field feeds back into what NEER senses next.
Comes in
Goes out
Built for all three systems.
The same agent and the same workspace, with the depth each system needs.
Every junction, every hydrant, every hour.
Model your distribution system in EPANET or Hydra, test fire flow at every hydrant in one run, and see pressure across every zone. Connect SCADA and NEER forecasts tomorrow's demand hour by hour.
- EPANET and Hydra models, built from your GIS by the agent
- Fire flow for every hydrant at once, pass or fail at 20 psi
- Pressure zones, tanks and pumps, with extended-period runs
- Hourly demand forecasts from AMI meters (Badger Meter, Master Meter, Neptune), and live pressure from pressure loggers and SCADA
- Main break likelihood, and optimization for pressure, fire flow, velocity and headloss
An EPANET model in 3D, colored by pressure and flow.
From I&I to overflows, calibrated.
SWMM and Hydra models calibrated meter by meter, radar rainfall on every subcatchment, and a clear answer on where inflow and infiltration come from.
- SWMM and Hydra models with RDII and RTK
- Calibration to each flow meter's upstream area
- Overflows, surcharge and basement backups for any design storm
- PACP and MACP inspections feeding risk scores
- Flow monitoring programs and I&I studies
Calibrating a SWMM model against flow meters.
See the flood before it arrives.
HEC-RAS 1D and 2D models in the browser, built by the agent from a boundary. Watch the water spread street by street, and run it on tonight's forecast.
- HEC-RAS 1D, 2D and 1D/2D, with terrain and boundary conditions
- Watershed delineation from a boundary or HUC ID
- Flood depth over buildings and roads, in 3D
- Flood forecasts hours ahead on radar and HRRR rain
- Inlets, outfalls and culverts scored for risk, and MS4 evidence
HEC-RAS 2D flooding in 3D, in the browser.
Can your system handle the next development?
When a developer files plans, NEER updates your water, sewer and stormwater models with the new demand, flow and runoff, checks every level of service, and proposes what it would take to say yes.
Can our systems serve the 240-unit development at Oak and 9th?
New demand added to the EPANET model. Pressure holds; fire flow falls short until one main is upsized.
Upsize 340 ft of 6-in main to 8-inAdded baseflow and the RDII your standard allows. The trunk stays within its level of service.
Meets level of serviceMore pavement raises the peak. Underground storage brings it back to the pre-development rate.
28,000 cf of storageIllustration. Figures are an example, not a customer result.
New demands on the right junctions, then pressure, capacity and fire flow at every hydrant near the site.
Updated baseflow, with RDII allocated at the rate your standard allows, run against your 5- or 10-year level of service.
Pre- and post-development runoff compared, and options sized to close the gap: detention basins, underground storage, and more.
One manhole, five names. Until now.
Your GIS, CMMS, model, meter vendor and CCTV contractor each call the same asset something different. NEER joins them into one record, so a question reaches every system at once.
Today
In NEER
Illustration with example IDs.
From reactive to autonomous.
Most utilities start on the left. NEER takes you up one step at a time, and each step pays for itself before the next.
Reactive
Fix it when it breaks. Data lives in spreadsheets, binders and one person's head. The model is five years old.
Where most systems are today
Connected
Network, sensors, inspections and rainfall on one map, checked automatically. Everyone sees the same numbers.
With NEER AIP, managed monitoring and Field & Collect
Predictive
Calibrated models, risk scores for every asset and a capital plan optimized for your budget. You know where to spend before you spend.
With the NEER Agent, Hydra, risk and optimization
Autonomous
The system forecasts the next storm, flags the pipes at risk, drafts the work orders and alerts the crew. Your team reviews and approves.
With the Digital Twin and your own agents over MCP
One intelligence for water, sewer and stormwater.
NEER is the agent at the center of your system. It knows your network, reads every sensor and model, and works across all three systems, so a question about a storm, a main break or a capital plan has one place to go.
Ask for the model. NEER builds it.
It sets up models, calibrates them and runs design storms from a sentence. It shows where every number comes from, and nothing changes until you approve it.
Drop a boundary or HUC ID. Streams and sub-watersheds come back ready for SWMM or HEC-RAS.
SWMM and EPANET built from your GIS, run, and checked for mass balance and flooding.
Forecast rain, gauges and asset condition fused into a flood-risk map by sub-basin.
HEC-RAS models from scratch, with depth and extent rasters for planning or FEMA submittals.
Capability without giving up control.
The agent proposes. Nothing touches your network or models until someone applies it.
Each answer links to the data, run or calculation behind it.
An inspection or maintenance import can be rolled back as a whole.
The agent and your own agents act with exactly the access you have.
Export your network, models and results in standard formats at any time.
No hardware sales and no vendor fees, so our advice is our own.
One workspace. Every role gets what it needs.
The same network and the same numbers, shown the way each person works.
The agent builds, calibrates and runs. You check the hydraulics and approve.
Forecasts and alerts for the meters and pipes you watch, before the rain arrives.
Rounds, inspections and photos, offline, landing on the asset they belong to.
Scores with reasons, and a capital plan tested against the model.
Live dashboards and a year-by-year program, shared by link.
Free inside a utility's workspace, with your firm's own workspace for everything else.
Know what to fix, and when.
Score every pipe and manhole, then let NEER find the mix of projects that does the most for your budget, checked with real model runs.
Every asset, scored and explained.
Likelihood of failure from condition, age and material. Consequence from what each pipe serves and what sits above it. Every run is saved, compared and adopted when you're ready.
- PACP and MACP inspections, with video, from any vendor's export
- Work orders and cleaning history from your CMMS
- Likelihood × consequence, with the reason for every score
- Risk over time, so you see what waiting costs
- Inspection and cleaning cycles planned from the scores
Risk matrix
Illustration. Each dot is a pipe; the top right is where to act first.The best projects for your budget.
List your candidate projects: upsizing, storage, rehab, pumps. NEER tests thousands of combinations against your model and lays out the trade-off between cost and results, so you choose with the numbers in front of you.
- Multi-objective search scored by real SWMM and EPANET runs
- Goals for overflows, flood volume, surcharge, basement backups, pressure and fire flow
- Risk reduction over time, not just today
- A year-by-year program that fits your budget, exported to GIS and work orders
Every program, in 3D
Illustration. Drag to rotate. Dark points are the best trade-offs; red is chosen.Program by year
Know before the storm arrives.
Your calibrated model and a neural network for every sensor, running each hour on live data, SCADA and forecast rain. For drinking water, NEER forecasts tomorrow's demand hour by hour, so you can plan pumps and tanks before the morning peak.
- Sewer: flow and depth in every pipe, warning of overflows and surcharge
- Stormwater: levels at outfalls, inlets and flood-prone streets
- Drinking water: hourly demand forecasts by zone from AMI meter reads, with tank levels and pressure from SCADA and pressure loggers
- Setup, monthly QA/QC and staff training included
Meter FM-7, next 12 hours
Rain at the scale of your streets.
Storms don't fall evenly on a city. NEER starts from radar corrected against rain gauges, adds NOAA's forecast, sharpens it with AI and turns it into flood maps for the next hours, street by street.
Gauge-adjusted radar rainfall for every subcatchment, with history for calibration.
The next 18 hours of rain, updated every hour, feeding scheduled model runs.
Generative AI (NVIDIA CorrDiff) adds the local detail a regional forecast misses.
Eight hours of observed rain and sixteen of forecast run through the model: depth at every step, and the buildings and roads it reaches.
Illustrations. Weather and flood forecasting are part of the digital twin; radar rainfall is included in every plan.
The map in every crew's pocket.
NEER Field puts rounds and inspections on a phone, online or off. Every photo and reading lands on the asset it belongs to, and supervisors review it before it counts. Collect turns any question into a public form behind a QR code.
- Rounds and inspections on the phone, offline in the field
- Photos, readings and checklists tied to each pipe, manhole or hydrant
- Supervisors review and correct submissions before they're final
- Public reports by QR code, with map and photo questions, no account needed
- Exports to CSV and shapefile
Build water AI on your own data.
Your network, sensors, inspections and rainfall are already in NEER. Start from a template, train on a GPU in minutes, and put the model to work. No IT ticket, no data export.
- Templates: CCTV defect detection, flow meter QA, RDII forecasting, main break likelihood, demand forecasting, flood nowcasting
- GPU and CPU machines on demand: H100, A100, A6000 and L40S
- Your data stays in your workspace, under the same permissions
Example: training a CCTV defect model on an A100.
Physics models, trained into neural networks.
Live decisions can't wait hours for a 2D run. NEER runs your calibrated model thousands of times, trains a neural network on the results, and forecasts every pipe, junction and street in seconds. The physics model stays the source of truth.
SWMM, EPANET, HEC-RAS or Hydra, calibrated to your meters.
Design storms, forecast rain, demands and pump settings, each run through the physics model.
Trained on the runs to predict depth, flow and pressure everywhere, not just at the sensors.
Every forecast is checked against the physics model and your sensors, and the network retrains when the model changes.
Illustration. Speed-up depends on the model and the network.
The network predicts the whole system: flow in every pipe, pressure at every junction, depth on every street.
It learns from your calibrated model, and NEER compares its answers to the physics model and live sensors.
Forecasts every hour on new rain and demand, so alerts arrive while there is still time to respond.
We run the program with you, end to end.
Software is half the job. NEER's engineers plan your monitoring, help you choose and deploy the hardware, keep the data clean and turn it into answers.
Plan
Where to put meters and gauges, using your model to find where data matters most.
Vendor-neutral specs and comparisons for flow meters, rain gauges, AMI water meters, pressure loggers and telemetry.
Deploy
We coordinate install and commissioning with your vendor and confirm every site reports.
Live feeds from your flow monitoring vendors, AMI meters, pressure loggers, SCADA, and Cityworks, Lucity, Cartegraph or Maximo.
Monitor
An analyst reviews every flag, chases your vendor about failing sites and approves the data.
Gauge-adjusted radar for every subcatchment, checked against your gauges.
Analyze
Which basins leak most, inflow versus infiltration, RTK for each and where to inspect next.
Pressure zones from loggers and hydrant tests; flood confirmation from level sensors.
Model
Your existing model brought in by Hydra, with a run-by-run comparison.
An engineer matches the model to your existing results and calibrates it to your meters.
Operate
A year of history cleaned, first training and calibration, alert thresholds set with your staff.
GIS import, network setup and training for your team.
Vendor-neutral, by policy.
NEER doesn't sell hardware and takes no fees from meter vendors, so our advice on what to buy and where to put it is our own. You buy from the vendor you choose; we make it work.
Everything for water, sewer and stormwater.
One price covers all three systems. Here is what NEER does for each.
| Capability | Drinking water | Sewer | Stormwater |
|---|---|---|---|
| Models | EPANET and Hydra, built from GIS by the agent | SWMM and Hydra, built from GIS by the agent | SWMM, HEC-RAS 1D/2D, watershed delineation |
| Design events | Fire flow, demand scenarios | Design storms, RDII and RTK | Design storms, 2D flood maps |
| Calibration | Pressure loggers, hydrant tests, SCADA days | Flow meters, each meter's upstream area | Rain gauges and level sensors |
| Rainfall | — | Gauge-adjusted radar for every subcatchment | Gauge-adjusted radar for every subcatchment |
| Condition and risk | Likelihood × consequence for every main | PACP and MACP, CCTV, likelihood × consequence | Inlets, outfalls and culverts scored |
| Optimization goals | Pressure, fire flow, velocity, headloss | Overflows, surcharge, basement backups | Flood volume, freeboard |
| Forecasting | Hourly demand and pressure from SCADA | Flow and depth in every pipe | Levels and flooding |
| Development review | New demand, pressure, capacity and fire flow | Baseflow and allowed RDII against your level of service | Pre vs post runoff, detention and storage sized |
| Studies | Pressure zones | I&I study | Flood confirmation |
| Field and public | Hydrant and valve rounds | Manhole inspections, overflow reports | Flooding reports by QR code |
One platform, and everything around it.
NEER AIP is the workspace. The agent, engines, data and APIs around it work inside it, or on their own.
Water simulation, from tap to outfall.
Hydra is NEER's own simulation engine, free and open source. It reads EPANET and SWMM files and solves them with new solvers, on your laptop, from the command line or inside NEER. No license server, no node limits.
Built on the EPANET data model and reads EPANET 2.x files: pressures, flows, extended-period runs.
Built on the SWMM data model: rainfall-runoff, dynamic-wave routing and water quality.
Surface flooding coupled to the pipe network at manholes and inlets.
Free under AGPL-3.0 for any work, including client projects. A commercial license covers shipping Hydra inside a product.
Bring your model. Switching is free.
Hydra converts your existing model, runs it and shows how the results compare before you commit. On Enterprise, our engineers match it to your existing results at no charge.
of 2.6 million node pressures within 0.1 of EPANET, across 11 test networks.
Bring your own agent.
Every action in NEER is a tool your agent can call. Connect Claude, ChatGPT or any MCP client, sign in, and it builds models, runs storms and reads results with the same permissions you have.
- Models, runs, sensors, rainfall, risk and plans as MCP tools
- OAuth sign-in or an API key
- The Model Runs API and Weather API for your own software
A workspace for everyone who touches the system.
Every system and every user, priced by the population you serve. Your consultants work in it free.
From $25,000 a year TeamEngineering firmsA shared firm workspace for modeling and calibration, plus a partner program for utility work.
$300 a month, 3 seats PersonalModelersEvery engine and radar rainfall in the browser, with no node limits.
Free, or $120 a month Education & impactSchools and communitiesFree for students and courses; up to 50% off for under-resourced utilities.
By applicationCommunity impact: India Flood Atlas
Free, public 100-year flood hazard maps for all 36 states and union territories. Work we give away.
Electric, gas and public works, in the same workspace.
Cities and utilities run more than pipes. Bring electric, gas, streets, streetlights and trees into the same map, so one team works from one place.
Hydraulic models, calibration and flood forecasting are built for water, sewer and stormwater. A city's Enterprise workspace covers its other assets at no extra cost.
Your data. Your AI. Our security.
SOC 2 Type I · in progress Our infrastructure partners are already fully compliant.Owners, admins, members and guests, down to each project.
Authenticator apps and SMS codes, plus Google and Apple sign-in.
Every change to your network and models is recorded.
In transit and at rest. SOC 2 Type I in progress.
Built for engineers. Designed for infrastructure. Powered by AI.
NEER is a team of water-resources engineers and software developers in Kansas City, building the AI tools the water industry has been missing: purpose-built, not repurposed.
Every community, whatever its size, deserves the smartest civil engineering tools. NEER gives utilities, cities and consultants a foundational model that is powerful, affordable and intuitive.
Communities of any size confidently designing their water, sewer, stormwater, street, electric, gas and public works infrastructure with AI.
Empower your career journey with NEER.
Seasoned engineers, geospatial analysts, recent graduates and anyone who wants to use technology for good.
Work that improves public safety and sustainability, and makes a real difference in people's lives.
A team where everyone is seen, supported and able to thrive.
Learn from industry leaders, explore new tools and build your career path.
Engineering meets data science, geospatial analytics, machine learning and digital twins.
Flexible, remote-friendly work.
A fast-growing company that values fresh ideas and creative thinking.
We don't have open positions right now. Check back for future openings, or write to us at support@neer.ai.
Get in touch →See NEER on your own system.
Send us your GIS or an existing model, and we'll show it running in NEER. Questions about pricing, pilots or partnerships come here too.
- A working session with an engineer, not a slide deck
- Your own network, model or sensor data if you have it
- Pricing for your utility or firm
Prefer email? support@neer.ai